Liquid / Gas Meter Validation

Liquid / Gas Meter Validation requires that the template used to create the Element contains the word "meter" and is of type "measurement".

Meters with corrected measurement – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Measured	Mass/Volume	\<same as above>	MeasuredMass / NetVolume	Double
Corrected	Mass/Volume	\<same as above>	CorrectedMass / CorrectedVolume	Double
Manual Flag	\<none>	\<same as above>	ManualAdjustmentFlag	Boolean

Meters with zero measurement / tolerance – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Measured	Mass/Volume	\<same as above>	MeasuredMass / NetVolume	Double
Corrected	Mass/Volume	\<same as above>	CorrectedMass / CorrectedVolume	Double
Tolerance	Mass/Volume	\<same as above>	MassTolerance / VolumeTolerance	Double
Corrected Tolerance	Mass/Volume	\<same as above>	CorrectedMassTolerance / CorrectedVolumeTolerance	Double
Manual Flag	\<none>	\<same as above>	ManualAdjustmentFlag	Boolean

Meters with zero density and non zero measurement – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Measured	Mass/Volume	\<same as above>	MeasuredMass / NetVolume	Double
Corrected	Mass/Volume	\<same as above>	CorrectedMass / CorrectedVolume	Double
Density	Density, Specific Gravity	\<same as above>	Density	Double
Manual Flag	\<none>	\<same as above>	ManualAdjustmentFlag	Boolean

Meters with a change of in / out of service – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String

Meters density comparison to default density – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Density	Density, Specific Gravity	\<same as above>	Density	Double
Tank Material	\<none>	\<same as above>	Material	String
NOTE: This rule also requires the use of the material and material density columns in a material table. See Rules Using the Sigmafine Materials Table.

Meters density comparison between cases – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Density	Density, Specific Gravity	\<same as above>	Density	Double

Meters measurement comparison between cases – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Measured	Mass/Volume	\<same as above>	MeasuredMass / NetVolume	Double
Corrected	Mass/Volume	\<same as above>	CorrectedMass / CorrectedVolume	Double
Manual Flag	\<none>	\<same as above>	ManualAdjustmentFlag	Boolean

Meters with bad Attribute values – Required Analysis Attributes

Configuration Parameter	Default Template Name
Element Template	SF_LiquidMeterTemplateSF_GasMeterTemplate
NOTE: A template, not an attribute, is selected for this rule.

Disconnected Meters – Required Analysis Attributes

Configuration Parameter	Default Template Name
Element Template	SF_LiquidMeterTemplateSF_GasMeterTemplate
NOTE: A template, not an attribute, is selected for this rule.

Gas Meters with zero molecular weight and non zero measurement – Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Measured	Mass/Volume	\<same as above>	MeasuredMass / NetVolume	Double
Corrected	Mass/Volume	\<same as above>	CorrectedMass / CorrectedVolume	Double
Molecular Weight	Molecular Weight	\<same as above>	MolecularWeight	Double
Manual Flag	\<none>	\<same as above>	ManualAdjustmentFlag	Boolean

Gas Meters with molecular weight comparison between cases - Required Analysis Attributes

Configuration Parameter	Attribute Unit	Template Name(s)	Default Attribute Name	Parameter Value Type
Status	\<none>	SF_LiquidMeterTemplateSF_GasMeterTemplate	ObjectStatus	String
Molecular Weight	Molecular Weight	\<same as above>	MolecularWeight	Double